We have a Dell MD3220. one of the wrong drives was pulled out by a end user trying to swap a failed drive. Then after the correct drive was replaced the old drive was put back into the correct slot. now we have one hot spare(enclosure 0, slot 23) subbing for another hot spare(enclosure 2, slot 22). The hot spare that is being subbed for has been replaced by two new drives now and the hot spare in use has still not gone away. any suggestions on what to do next?
Virtual Disk - Hot Spare in Use
Storage array: MD3220
Disk group: 2
Failed physical disk at: enclosure 2, slot 22
Service action (removal) allowed: No
Service action LED on component: No
Replaced by physical disk at: enclosure 0, slot 23
Virtual Disks: 3
RAID level: 5
Status: Degraded