Hi Team,
Situation:
- Server with 04 FC ports.
- Storage SC4020 (dual controller 16Gb FC type): FE in Virtual port mode
- 2 pcs of switch Brocade 65xx: No zone.
So inside the DSM, server has 16 paths to Volume.
After create zone on Brocade switch (follow Deployment guide), the server only has 8 paths (HBA to Storage FEs' virtual WWN), other 8 paths (HBA to Storage FEs' physical WWN) are disconnected. And inside DSM, it shows "Partial connect". Here is some from CLI as the attached file.
Pls advise how to remove the 8 disconnected paths.